License plate screws may seem like a small and insignificant part of a vehicle, but they play an essential role in securing the license plate to the car. However, many people may not know the proper size for these screws, which can result in difficulties when trying to replace or install new license plates. In this article, we will discuss the various sizes of license plate screws and how to choose the right one for your vehicle.
Knowing the correct size will not only ensure a secure fit, but it will also save you time and hassle in the long run. So, let’s dive into the world of license plate screws and find out what size is the right size.
Table of Contents
What size are license plate screws?
License plate screws are an essential component in attaching a license plate to a vehicle. Generally, license plate screws are sized specifically for license plates and vary in size based on the type of vehicle.
The most common size of license plate screws is 6 mm in diameter and 20 mm in length. These are used for most standard license plates on passenger vehicles, such as cars, trucks, and SUVs. These screws are also appropriate for motorcycles and trailers.
In some cases, vehicles may require larger license plate screws. For commercial trucks and trailers, the recommended license plate screw size is 8 mm in diameter and 25 mm in length. This is due to the heavier weight and larger size of these vehicles, which require stronger screws to keep the license plate securely attached.
On the other hand, some vehicles such as mopeds or ATVs may require smaller license plate screws. These vehicles typically use 4 mm or 5 mm diameter screws and are usually shorter in length as well.
It is important to note that license plate screw sizes may vary depending on the manufacturer and model of the vehicle. It is always best to refer to the vehicle’s owner manual or consult with a mechanic to ensure the correct size of license plate screws are used.
Where to Buy Screws for License Plates?
Securing a license plate onto a vehicle may seem like a simple task, but it requires the use of the right screws. These small but important components play a crucial role in ensuring the license plate stays securely attached to the vehicle. Whether you are replacing old screws or need to install a new license plate, knowing where to buy screws for license plates is essential.
Here are some places where you can purchase screws for license plates:
1. Auto parts stores
One of the most common places to buy screws for license plates is at auto parts stores. These stores usually have a wide selection of automotive hardware, including screws specifically designed for license plates. They may also have different sizes and types of screws to fit various vehicles. You can find auto parts stores in your local area or online.
2. Hardware stores
Hardware stores, such as Home Depot or Lowe’s, also carry screws for license plates. While they may not have as wide of a selection as auto parts stores, they usually have standard screw sizes that will fit most vehicles. The advantage of buying from a hardware store is that you can easily match the screws to your vehicle’s existing ones.
3. Online retailers
With the rise of e-commerce, buying screws for license plates online has become a popular option. Online retailers such as Amazon, eBay, and Walmart have a vast selection of screws for license plates at competitive prices. You can also find specialty stores that focus solely on automotive hardware, making it easier to find the exact screws you need.
If you want to ensure that you are purchasing the correct screws for your specific vehicle, then you can buy them from the dealership where you purchased your car. They may be slightly more expensive, but you can be confident that the screws will fit perfectly.
5. Salvage yards
If you are on a budget or looking for a specific type of screw, you can check out your local salvage yards. These yards typically have a variety of car parts, including screws, that you can purchase at a fraction of the cost. However, keep in mind that these screws may have some wear and tear and may not be as reliable as brand-new ones.
Some other tips to consider when buying screws for license plates:
- Make sure to check the size and type of screw needed for your vehicle before making a purchase.
- Consider using stainless steel screws for better durability and resistance to rust.
- If you are unsure of the screw size, take a sample screw with you when shopping to ensure a perfect match.
- Always read reviews or check the product specifications to ensure you are buying quality screws that will last.
How to Replace License Plate Screws
Replacing license plate screws may seem like a simple task, but it is important to do it correctly to ensure the license plate is securely fastened to the vehicle. Here are the steps to follow when replacing license plate screws:
1. Gather the necessary tools
To replace license plate screws, you will need a screwdriver (either flathead or Phillips head depending on the type of screw), new screws, and possibly pliers if the old screws are difficult to remove.
2. Remove the old screws
Using a screwdriver, loosen and remove the old screws from the license plate. In some cases, the screws may be rusted or stuck, in which case you can use pliers to help loosen them. Make sure to remove all of the old screws.
3. Inspect the holes
After removing the old screws, check the holes on the license plate to make sure they are clean and free of any debris or rust. If there is rust, you can try using a wire brush to clean the holes.
4. Clean the new screws
Before installing the new screws, it is a good idea to clean them with a cloth to remove any dirt or debris. This will help the screws to fit securely in the holes.
5. Align the new screws
Place the new screws in the holes on the license plate, making sure they are aligned with the holes on the vehicle.
6. Tighten the screws
Using a screwdriver, begin tightening the screws into the holes. Make sure not to over-tighten as this can damage the threads on the screw or strip the holes on the vehicle.
7. Test the license plate
Once the new screws are securely in place, give the license plate a slight tug to ensure it is firmly attached to the vehicle.
8. Repeat for remaining screws
If your license plate requires more than two screws, repeat the above steps for each additional screw.
9. Check periodically
It is a good practice to periodically check the license plate screws to make sure they are still tight and secure.
Does Lowes have license plate screws?
Yes, Lowes does sell license plate screws. These screws are typically located in the automotive section of the store, and come in a variety of sizes and styles to fit different types of license plates.
License plate screws are used to attach a license plate to a vehicle’s metal frame. They are small, typically stainless steel screws that are corrosion resistant and designed to withstand various weather conditions. These screws are also tamper-proof, making it difficult for thieves to remove a license plate.
Lowes offers a range of license plate screws from popular brands such as Hillman, National Hardware, and Blue Hawk. These screws are available in different finishes, such as zinc-plated or stainless steel, to match the aesthetic of a vehicle.
In addition to traditional screws, Lowes also carries anti-theft license plate screws. These screws have a special design that makes them difficult to remove without a special tool, providing an extra layer of security for your license plate.
When purchasing license plate screws at Lowes, it is important to make sure you select the correct size for your vehicle. The most common sizes are 1/4 inch and 3/8 inch diameter screws.
It is worth noting that some states have specific regulations regarding the type of screws that are allowed to be used on license plates. For example, California prohibits the use of metal or hard plastic screws that can potentially damage another vehicle in the event of a collision. It is important to check with your local DMV to ensure you are using the appropriate screws for your state’s regulations.
In conclusion, choosing the right size license plate screws is important for ensuring a secure installation of your license plate. While the standard size for most vehicles is usually around 1/4 inch, it is important to check your vehicle’s manual or measure the existing screws to ensure the correct size.
Different types of screws are also available, such as self-tapping or machine screws, so it is important to consider the type that your license plate and vehicle require. By taking the time to properly select the size and type of license plate screws, you can prevent potential issues such as theft or damage to your license plate.
Frequently Asked Questions
What are the common sizes of license plate screws?
The most common size of license plate screws is 6 mm in diameter and 20 mm in length, typically used for standard license plates on passenger vehicles. Commercial trucks and trailers often require larger screws, usually 8 mm in diameter and 25 mm in length. Smaller vehicles like mopeds or ATVs may use 4 mm or 5 mm diameter screws.
Why is it important to know the correct size of license plate screws?
Knowing the correct size ensures a secure fit of the license plate to the vehicle, saving time and hassle in installation or replacement. The right size also prevents issues related to theft or damage to the license plate.
Where can I purchase screws for license plates?
Screws for license plates can be purchased at auto parts stores, hardware stores, online retailers, dealerships, and salvage yards. Each of these locations offers a range of sizes and types to suit different vehicle requirements.
Does the material of the license plate screw matter?
Yes, license plate screws come in different materials like stainless steel, zinc-plated steel, and nylon. Stainless steel screws are rust-resistant and durable, zinc-plated steel screws are also corrosion-resistant but less expensive, and nylon screws are non-corrosive and lightweight.
How do I replace license plate screws?
To replace license plate screws, gather the necessary tools (screwdriver, new screws, pliers), remove the old screws, inspect and clean the holes, align the new screws, tighten them without over-tightening, test the plate, and periodically check for security.
Does Lowes sell license plate screws?
Yes, Lowes sells license plate screws, including various sizes and styles from brands like Hillman, National Hardware, and Blue Hawk. They also offer anti-theft screws for added security. It’s important to select the correct size for your vehicle and adhere to state regulations.
What should I consider when buying license plate screws?
When purchasing screws, check the size and type required for your vehicle, consider stainless steel for durability, take a sample screw for size matching, read reviews, and ensure quality for longevity.
Are there specific regulations for license plate screws in some states?
Yes, some states have regulations regarding the type of screws used for license plates. For example, California prohibits metal or hard plastic screws that could damage other vehicles in collisions. It’s essential to check local DMV regulations.